|
Post by jufergu on Oct 5, 2013 15:31:12 GMT
|
|
|
Post by Pandagirl on Oct 5, 2013 16:52:22 GMT
That's wonderful Judy! Not just the dyeing project but stenciled wall is great! I'm glad I got to see the pictures. I will have to try the rit dye. I've used acid, green silk and Procion mx with varying processes. It's always nice to try something new. Thanks for sharing!
|
|
|
Post by MTRuth on Oct 7, 2013 18:32:23 GMT
Sorry you couldn't get the photos to work Judy. I'm not sure what you're doing incorrectly. The dyed bits are great. Good way to get a nice selection in the same color family.
|
|
|
Post by zed on Oct 8, 2013 9:33:39 GMT
They look great Judy I love RIT, Dylon is the most commonly available dye here but he doesn't work as well as RIT does, at least not the new kinds of Dylon. I got RIT from ebay because it was so good. I've done some screen shots for how to post photos from blogs, I'll put a post in FAQs
|
|
|
Post by zed on Oct 8, 2013 9:58:34 GMT
|
|
mindy
Junior Member
Posts: 16
|
Post by mindy on Jun 18, 2014 5:10:47 GMT
Hi guys! I was experimenting with rit dye today. Just curious what steps or methods you use? Should I have soaked the wool first in vinegar? Hot or cold water? How to rinse? My red did not turn out red:( what do you guys use to get a really bright red? My purple turned out as purple as can be though! Thanks for the help
|
|
|
Post by Pandagirl on Jun 18, 2014 15:20:40 GMT
Mindy, what were you dyeing? Was it the same fiber for both red and purple? Since Rit contains acid and Procion dyes, if you were trying to dye a polyester mix type product with the red that may explain lack of color. You can always redye the red to see if you get a darker color.
Good luck! Keep us posted. Perhaps someone has more experience with Rit. I haven't used it yet, just acid and Procion dyes themselves. I did use Idye once and got nice results. That was my first dye experiment. Since then, I just use the acid or Procion depending on the fiber.
|
|
|
Post by MTRuth on Jun 18, 2014 16:37:02 GMT
Hi Mindy - yes, soak the wool in vinegar water first. Room temp water is fine. I would then try steaming the dyed wool for 30 minutes. Let the wool cool and then rinse with room temp water.
I would suggest using acid dyes as they are meant for animal fibers and you won't have all the fiber resist part of RIT dyes washing out.
|
|